Categories: long

Комплексный обзор систем терморегулирования аккумуляторов (БТМС) для электромобилей


Introduction to Battery Thermal Management Systems

Электрические транспортные средства (электромобили) во многом полагаются на эффективную работу своих литий-ионных (Литий-ионный) аккумуляторные блоки. Эти аккумуляторные блоки особенно чувствительны к изменениям температуры., which can significantly impact their overall efficiency, including range, voltage performance, and charge times. Effective management of these temperatures is crucial for ensuring the longevity and reliability of EV battery packs.

The Impact of Temperature on Li-Ion Battery Performance

Effects of Low Temperatures

At low temperatures, the performance of Li-Ion batteries can be severely hindered. As temperatures drop, the chemical reactions within the battery cells slow down, leading to an increase in internal resistance. This phenomenon reduces the charge and discharge capacity, as well as the power capabilities of the battery pack.

In extremely cold conditions (below 0°C), the functionality of the battery can be compromised, potentially ceasing altogether. At temperatures below -20°C, there is a risk of irreversible damage to the battery pack, significantly affecting its cycle life and efficiency.

Effects of High Temperatures

Наоборот, high temperatures can also degrade battery performance. Elevated temperatures (above 60°C) can cause the battery pack to lose capacity and power. This loss is attributed to the depletion of lithium and the reduction of active materials within the battery cells. An increase in internal resistance further contributes to the decline in power output.

In extreme cases, high temperatures can lead to thermal runaway, where the battery heats uncontrollably, potentially causing self-ignition or explosion. Such scenarios underscore the necessity for a robust Battery Thermal Management System (БТМС) to maintain optimal operating conditions for the battery pack.

Role of the Battery Thermal Management System

A BTMS is engineered to keep the battery pack within its optimal temperature range (typically 20°C to 45°C) irrespective of external ambient conditions. By maintaining this temperature range, the BTMS ensures the battery’s performance, безопасность, и долголетие.

Components and Functionality of BTMS

A comprehensive BTMS includes various components such as heat exchangers, smart electric products, wiring, hoses, and a master controller with tailored firmware. This plug-and-play system is designed for seamless integration into the vehicle’s chassis, simplifying the setup process.

Cooling and Heating Mechanisms

В аккумуляторных блоках с жидкостным охлаждением, coolant circulates through the Battery Management System (БМС), transferring heat to and from the battery cells either via direct immersion or conduction through a battery plate. The coolant then flows through the BTMS, where it is conditioned to maintain the desired temperature.

  • Heating Mode

In heating mode, the BTMS ensures that the battery pack remains within the optimal temperature range during cold conditions, preventing performance degradation due to low temperatures.

  • Cooling Mode

In cooling mode, the BTMS prevents overheating, protecting the battery pack from the adverse effects of high temperatures and reducing the risk of thermal runaway.

Intelligent Control and Monitoring

An integrated master controller within the BTMS communicates with the Vehicle Control Unit (VCU) to receive inputs such as the average battery pack temperature and operational mode. In automatic mode, the BTMS controller adjusts its operation to maintain the set-point temperature efficiently.

The system is equipped with multiple pressure and temperature sensors, allowing the master controller to monitor and optimize the BTMS’s performance continuously. Critical data and fault codes are transmitted to the VCU, facilitating vehicle-level monitoring, diagnostics, and troubleshooting.

Заключение

TKT’s well-designed Battery Thermal Management System (БТМС) is critical for optimal performance, safety and longevity of lithium-ion battery packs in electric vehicles. By effectively regulating the temperature of the battery pack, the BTMS improves the range, efficiency and reliability of the vehicle, ensuring that electric vehicles are able to meet the demanding requirements of modern transportation.


yytyv

Recent Posts

EV DC Charging Voltage: What You Must Know

The EV charger is a precision device. If the EV DC charging voltage is not

2 weeks ago

Штаб-квартира TKT получила награду OGL за лучший партнер по непрерывной поддержке

Мы тесно сотрудничаем с Olectra. We are the bus air conditioning supplier for their buses.

2 months ago

Как выбрать лучшую систему кондиционирования воздуха для вашего автобуса

Selecting the right air conditioning system for your bus is critical to ensuring a comfortable

6 months ago

Комплексное руководство по лучшим кондиционерам для автодомов в 2024

The Role of a Quality Air Conditioner A best top-tier caravan air conditioner does more

6 months ago

Понимание и максимизация быстрой зарядки постоянным током для электромобилей

Электрические транспортные средства (электромобили) меняют ландшафт личного и коммерческого транспорта, promising reduced emissions

6 months ago